Wolftooth GnarWolf Chainguide

If you are a rider that fearlessly takes the tough lines and can’t afford to drop a chain, the Wolf Tooth GnarWolf™ chainguide is for you. Designed specifically around 1x wide/narrow chainrings like our patented Drop-Stop® chainrings, the GnarWolf will keep you chain glued to your chainring in the roughest and muddies of conditions.

The GnarWolf™ features:

• Infinite chainline adjustment between 48mm and 54mm via an elliptical expanding mandrel. There are no shims required!
• Infinite vertical adjustement between 28t and 36t round rings (28t-34t elliptical)
• Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide’s adjustments.
• All adjustments made with common 4 mm hex key.
• Designed for the rigors of Enduro, heavy trail, mud and even DH riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g.
• Specific guide shaping is optimized for use with elliptical/oval and round chainrings.
• Patent pending design.

Compatibility:

• Designed to fit on any bike with an ISCG 05 Mount
• Installation instructions shown in photos on this page.
• Optimized for use with both Elliptical and Round Chainrings.
  • Round chainrings 28t-36t or elliptical chainrings 28t-34t
• For 1x use only
• Due to frame and bike geometery there will be some bikes and some chainring sizes that will not work with the GnarWolf.  Here are the known exceptions:
  • Santa Cruz Hightower with larger than a 30t Chainring

Tech Specs:

• Design and manufactured in Minneapolis, MN USA
• Material 7075-T6 with Stainless Steel Hardware
• Colors – black with optional bolt colors
• Designed to accommodate chainlines from approx. 48mm to 54mm.
• For round chainrings 28t-36t or elliptical chainrings 28-34t
• Weight – 44