Wolftooth GCX 42t 44t

Posted by on


Don’t throw away a $600 cassette just because the 42T aluminum sprocket is worn out! The Wolf Tooth GCX sprocket replaces the worn out stock 42T on your XX1 or X01 cassette. Shifting performance and durability matches the stock part.

To remove stock 42T: Gently pry with a screwdriver between 36T and 42T at each pin location. You will need to go around the cassette 2-3 times, moving the cog just a little each time.

To install Wolf Tooth GCX 42T: align large hole (see laser marked triangle) with large pin on cassette. Gently squeeze each of the 18 pin locations together with a Channel Lock type pliers until all pins are bottomed out.

Detailed step-by-step instructions are available here.

Made in the USA from 7075-T6 aluminum.

Weight 83g


For more information please contact your local dealer. Or us directly from our contact page.

Wolftooth Cassette Cogs

← Older Post Newer Post →

Leave a comment

Please note, comments must be approved before they are published